When buying a wall lamp, first look at the quality of the lamp itself. The lampshade is generally made of glass, and the bracket is generally made of metal. The lampshade mainly depends on whether its light transmittance is suitable, and the appearance and color should correspond to the overall style of the room. Whether the metal's corrosion resistance is outstanding, whether the color and luster are bright and full, these are important goals for checking the quality. Generally speaking, the brightness of the light is soft, and the degree should be less than 60 watts. In addition, different types of wall lamps should be selected according to the needs of the installation. For example, use a single-head wall lamp for a small room, use a double-head wall lamp for a large room, and choose a thicker wall lamp if the space is large; otherwise, choose a thin wall lamp. Some. It should be noted that it is best to choose a wall lamp with a protective cover for the bulb, so as to avoid igniting the wallpaper and causing risks.

The style standard of the wall lamp should be in harmony with the installation place. For example, double wall lamps can be installed in large rooms, and single wall lamps can be installed in small rooms. The thickness of the wall lamp should be in harmony with the installation environment. If the surrounding area is large, you can choose a thick wall lamp; if the surrounding area is narrow, you can choose a thin wall lamp. The installation method of the wall lamp is relatively simple. After the orientation is determined, it is mainly the fixing of the wall lamp holder, and the method of embedded parts or perforation is often used to fix the wall lamp on the wall.

There are many gluing methods for gluing construction, but the following are commonly used. Brushing method Use a brush to apply the adhesive on the bonding surface. This is the simplest and most common method. This method is suitable for single-piece or small batch production and construction. Spraying method Regarding low-viscosity adhesives, general paint spray guns can be used for spraying. For those high-viscosity adhesives that have a short active period and are difficult to clean, you can use a spray gun made from Bert in the reinforced plastics industry.